FAQs
More FAQs- Why do I need to clean and disinfect?
- How much is all this going to cost me?
- How long will it take to have my floors coated with acrylic?
A common misconception is that cleaning and disinfection are one and the same. In reality, they are two different processes which achieve related results but not the same results. Cleaning is the removal of visible dirt and soiling, for example the coffee ring on a kitchen counter. While cleaning may remove pathogens from surfaces by wiping them away, it does NOT kill pathogens. Disinfection, on the other hand, does KILL pathogens on surfaces through the use of chemicals. As such, both processes are used hand-in-hand — first cleaning, then disinfection — in infection control efforts. Please note — not all disinfectants are created equally! Typically, disinfectants are developed to kill certain types or classes of pathogens. As such, ensure that the disinfectant used in your facility has been approved to treat your pathogen of concern.
FACT — Everyone has budgets. We understand that. As such, our Protect-3 Advance program has been designed to provide you with options so that you can make an informed and affordable choice. Our Program was not designed as a one-size-fits-all but rather as a customized solution for each and every one of our customers. Our goal is to provide you with a range of possible solutions for how you can maintain the health and safety of your facility and not break the bank! So, why not call ServiceMaster Clean today to find out what your choices are?
Preparation will depend on the condition of the existing floor, current number of coats, repairs required, etc. When applying an acrylic finish, stripping of the old finish is usually necessary. When that’s the case, finish removal plus the application of 3 coats of finish requires 1 hour for every 150 square feet of flooring. Generally, 3 coats of finish are required to achieve the desired effect. If a floor does not require stripping, it can generally be shower scrubbed which is a procedure used for preparing a floor for receiving a new layer of finish. Once that has taken place, a floor can be recoated at anywhere from 4,000 to 6,000 square feet per hour.